November 26, 2021
 | By 
Jet Plumbers

Mold can and will grow in any humid atmosphere. Case in point: toilets. In spite of the very best ventilation systems readily available, it is all too simple for mold to begin developing. As it does, you shouldn't leave it alone. Unchecked mold can lead to respiratory problems and other illnesses, especially for people that are immuno-compromised or possess pre-existing respiratory illnesses. No one wants to put themselves or their families at that type of risk.

Gaps between your tub or shower along with the wall would be the perfect place for mold to grow. As old caulk wears away and the gaps grow, more moisture can work its way inside the gap with time. The more moisture seeps into the dark, secluded location, the greater mould can develop. So, what do you do if you notice mold growing in the seals on your own bathtub? Recaulk it, of course. Here is how you can do that right now:

What tools would you need?

Before you caulk a bathtub, you'll want the ideal tools. Here's a thorough listing you can use while preparing for your project. Make sure you have the following:

  • A caulking gun.
  • A tube of caulk. Not all caulk is identical, so ensure you choose the ideal variety for your project.
  • A set of rubber work gloves.
  • A razor scraper with single-edge razor blades.
  • A utility knife. This can act as a stand-in for the razor scraper should you either a.) don't wish to buy a single or b.) can not find one.
  • Denatured alcohol.
  • Paper towels or older linens for cleanup.

How can you caulk a bathtub?

Step 1: Removing the old caulk

  1. Eliminate the old caulk. This is where your razor scraper comes in. This is the tool you'll use to remove present caulk. You will just scratch using the razor, replacing the razor as required, until all old caulk is eliminated. Plastic blades are favored, as metal may damage tubs that are made from plastic. The easiest way to scrape the old caulk is by using quick, sharp strokes using the scraper. Be careful!
  2. Clean the old slough off. Wipe up things. Eliminate any lingering physical pieces. You might even use a vacuum to suck up any leftover bits.
  3. Wipe things down with denatured alcohol. This is the final step toward cleaning in preparation of applying new caulk. It'll eliminate any stray bits your other efforts have left.

Step 2: incorporating the new caulk

  1. Insert your new caulk. Be sure that the caulk you bought was formulated for the sort of bathtub you use. Then load it in the gun. Cut the tip off of the tube at a 45 degree angle, push the application gun via its nozzle to break the seal, and get ready to do the job.
  2. Apply the caulk. There are a number of things you'll want to do in order to be sure that this goes smoothly. First, take your own time. Secondly, use painters tape to assist you with all straight lines since you employ. Third, maintain the caulking gun at a 45 degree angle in your edging. You want to create as little mess as possible and leave as little room for mistakes.
  3. Smooth the caulk. Caulk is originally applied as a very long tube. Use a moist paper towel or rag and press it gently into the seam you have created with your finger. Run it across the caulk in a constant line to create the clean look you're choosing.
  4. Remove the tape and then allow the caulk dry. Eliminate the tape so that it doesn't get trapped as it dries. After that, let it dry. Don't touch the caulk or utilize your tub for at least 2 days after application. After that period has passed, though, your re-caulked tub will be prepared for action.

What should you do if you've got a problem whilst caulking your tub?

Caulking a tub is a mid-level pipes job. While the procedure itself is fairly simple, it still poses challenges. There's no doubt in having trouble with any part of the procedure. Should you encounter problems, it is far better to defer to a professional than to keep pushing on on your own.

A professional plumber will have the ability to help you fix whatever has gone wrong. They will also have the ability to figure out why you ran into problem and help you fix your technique for future endeavors.

We have to give you a warning. We are sorry to say, but now that you know how to successfully caulk a bathtub… everyone you know will ask you to assist with theirs. Would you blame them? It's a fairly impressive skill that you have picked up.

If you don't have the time, you are able to send everybody asking you for assistance our manner. Tell them to call Jet Plumbers Arvada Co the staff in Jet Plumbers Arvada Co for help with any portion of the home's plumbing. Adding re-caulking the bathtub.