What To Do After Your AC Unit Will Not Turn On Arvada

November 20, 2020
 | By 
Jet Plumbers

To troubleshoot the reason your AC unit won't turn on, begin by making sure its circuit has not tripped. Next, ensure that your thermostat is functioning correctly. When it's, then proceed outside to check the condensate pump and the electric connections. Ultimately, try testing the device's double run capacitor.

As soon as you've figured out why your AC unit will not turn on, fixing it can often be surprisingly easy. We'll help you through both the troubleshooting measures and things to do to repair the issue you find. You could receive your AC unit began back up right now. Start by heading to your circuit breaker.

1. Trip the circuit breaker

Your fundamental electrical panel splits power from your primary supply line out to every electrical fixture throughout your home. This may contain both your thermostat (if it is connected rather than battery-operated) and your AC unit . Circuit breakers trip to shield your fixtures when they feel a surge of harmful amounts of electricity. Tripped circuit breakers cut off all electricity to the fixture they are shielding until you reset them.

Tripped circuit breakers are amazingly common. You may only notice that a circuit breaker tripped when you observe the fixture won't turn on. Find your main electrical service panel and look for tripped breakers. The triggered breaker will be changed down into the"OFF" position rather than the"ON" position, and may also be indicated by a red warning label. Simply flip the circuit breaker back on and see whether your AC unit begins back up.

2. Examine the thermostat

If your thermostat isn't functioning properly, then maybe it does not send the proper cooling directions to your AC unit. Even if the AC device is perfectly functional, it won't ever turn on since it does not know that you are telling it ! Malfunctioning thermostats are usually easy to spot. If the screen won't turn on, it doesn't respond to inputs, or it instantly loses programming, and then something is wrong. Consider replacing the batteries or, again, tripping a circuit breaker.

If nothing seems wrong with your thermostat, there is one relatively easy way to test it. First, turn off the power to your thermostat (THIS IS IMPORTANT). You will require a screwdriver. Take down your thermostat and open the access compartment at the back. Locate the green and red cables, detach them from their terminals, and wrap them together. Then, give up the wiring and turn the breaker back on. If the AC unit starts, then you need to replace the thermostat.

3. Clear the Drain Line Jet Plumbers Arvada Colorado

While you have the access panel open, find your unit's condensation pump. This pump eliminates moisture that builds on the device's condensation tray by pumping it through the drain line. This drain line harmlessly residue the warmth outside of the device. If the drain line becomes obstructed, however, then the pump won't be able to eliminate condensate. On the contrary, it is going to develop inside the AC unit until the device's safety features prevent it from activating.

Unclogging the drain pump is relatively simple. First, turn off the power to the AC. Find the tray, pump, and drain line. If you have a hand vac, suction out any excess moisture in the tray. Then, disconnect the drain line and apply the hand vac to suction out clogs inside it. If you don't have a hand vac, use water or compressed air. After reassembling the components, reintroduce a little moisture to the tray to make sure everything works correctly.

4. Replace the Dual Run Capacitor

Dual Run (or Dual Round) Capacitor malfunctions are among the most frequent AC problems. These capacitors sit within the AC unit's entry panel divide electricity to provide the fan and compressor at once. If they stop working, then the compressor and fan won't be able to begin the cooling procedure. Findingtesting, and even replacing the Dual Run Capacitor on your AC device is simple. Here's how to do it step by step:

What you will need: a screwdriver or nut driver (depending upon your unit), pliers, and a duster of some kind.

  • Switch off both the electricity for your AC unit and your own thermostat.
  • Open your access panel with the screwdriver or nut driver. Don't lose the screws!
  • Find the Double Run Capacitor. It's generally located on the top part box inside the entry panel. Double Run Capacitors are mounted, bolted into a holder, and attached to the electrical supply via three differently-colored cables.

    NOTE: The Dual Run Capacitor can be found next to another capacitor. If that's the case, look for the capacitor tagged with"COM,""FAN," and"HERM" inputs.

  • Dust off the top part box with your duster. Check the cables for signs of damage as you're at it.
  • Unscrew the Dual Run Capacitor out of its mount and eliminate it.
  • Check the labeling on the face of this capacitor to come across the capacitor's micro-farad rating (which will be labeled"uf"). This is the evaluation you will need to know to buy your replacement capacitor. Take a photo, write it down, or take the true capacitor with you once you buy a replacement.
  • Buy your replacement capacitor either online or at your regional hardware shop. Make certain that you get one using the identical micro-farad rating.

NOTE: Your Double Run Capacitor could be smaller than your current one. That's not necessarily a mistake. You might need to adjust the capacitor mount when reinstalling.

  • User that the pliers to disconnect the capacitor from the three wires connecting it to the power source. Make sure you remember which cable goes where (consider taking a picture with your telephone ).
  • Connect each wire into the new capacitor.
  • Re-mount the new capacitor back in the top element box. You may want to adjust the bracket or re-mount that the capacitor yourself.
  • Restart your own power and correct your thermostat to test the new capacitor. It can take 10-15 minutes to your AC device to restart.

If you've tried all these frequent troubleshooting steps and you still can not get your AC device to turn on, do not worry! These steps have not exhausted all of the potential quick fixes; only the ones that you should try yourself.

Whether you have exhausted your troubleshooting options or not, you can always call Jet Plumbers Arvada Co for back up. Our specialist electricians offer you reliable, licensed help that can address your problem and cool down your home fast. AC is particularly important during summers once we can't leave home, and therefore don't cook any more--in case your AC will not start, call Jet Plumbers today!